SOLAR, WIND, EB AND BATTERY POWER MERGING DEVICE – (SWEBMD)
Registered: 2014-10-21 13:15:51 UTC
Fingerprint: Show digital fingerprint
1d7e5a55e0f37fa47d9ec206fa4e2adeaa40ab492a1621b0eec35ea40eebe90b
MCN: CEJ3X-4DTX9-U9GBV
(c) Copyright 2014-10-21 13:15:51 - All Rights Reserved
SOLAR PANEL
The solar
panels are made of solar cells. A cell is a small disk of a semiconductor like
silicon. They are attached by wire to a circuit. As light strikes the
semiconductor, light is converted into electricity that flows through the
circuit. As soon as the light is removed, the solar cell stops producing power 12 to 21 DC volts.
WIND POWER
Wind
turbines make electricity? Simply stated, a wind turbine works the opposite of
a fan. Instead of using electricity to make wind, like a fan, wind turbines use
wind to make electricity. The wind turns the blades, which spin a shaft, which
connects to a generator and makes electricity12 to 21 DC volts.
Single-phase
electricity is what you have in your house. You generally talk about household
electrical service as single-phase, 220-volt AC service. If you use an
oscilloscope and look at the power found at a normal wall-plate outlet in your
house, what you will find is that the power at the wall plate looks like a sine
wave, and that wave oscillates between -220 volts and 230 volts (the peaks are
indeed at 230 volts; it is the effective RMS (Root
Mean Square) voltage that is 220 volts). The rate of oscillation for
the sine wave is 50 cycles per
second. Oscillating power like this is generally referred to as AC, or
alternating current.
BATTERY POWER
The chemical reaction in the
battery causes a buildup of electrons at the anode. This results in an
electrical difference between the anode and the cathode. You can think of this
difference as an unstable build-up of the electrons. The electron wants to
rearrange themselves to get rid of this difference. But they do this in a
certain way. Electrons repel each other and try to go to a place with fewer
electrons
In a battery, the only place to
go is to the cathode. But, the electrolyte keeps the electrons from going
straight from the anode to the cathode within the battery. When the circuit is
closed (a wire connects the cathode and the anode) the electrons will be able
to get to the cathode. In the picture above, the electrons go through the wire,
lighting the light bulb along the way. This is one way of describing how
electrical potential causes electrons to flow through the circuit.
However, these electrochemical processes change the
chemicals in anode and cathode to make them stop supplying electrons. So there
is a limited amount of power available in a battery 12 volts dc.
SOLAR, WIND, EB AND BATTERY POWER MERGING DEVICE –
(SWEBMD)
ü
Source 1st Solar power (optional).
ü
Source 2nd wind power (optional).
ü
Source 3rd EB power (optional).
ü
Source 4th Battery power for (optional) emergency.
ü
Yours
choose (all) Sources with or without EB power.
ü
Solar
Charge Controller
Solar charge
controllers are also known as charge regulators or just battery regulators. The
last term is probably the best to describe what this device actually does:
Solar battery chargers limit the rate of current being delivered to the battery
bank and protect the batteries from overcharging.
ü
MD INPUT
Source 1st Solar power12
to 21vdc (optional 24to33vdc).
ü
MD INPUT Source 2nd wind power12 to
21vdc (optional 24to33vdc).
ü
MD
INPUT Source 3rd EB power 180 to 230 vac.
ü
MD
INPUT Source 4th Battery power 12 vdc. (Optional 24vdc).
MD OUTPUT
12vdc (optional 24or48vdc).
SWEBMD how to works
Working
simple and High Technology merges
on DC VOLTS with
AC VOLTS powers.
Solar, wind power80 %( max) + EB power 20%.
Battery charging 20% form solar,
wind power.
Depend on the solar, wind Source.
Efficiency 95%.
Life 15 years.
.png)
